NEWS CENTER
We specialize in home energy storage, industrial and commercial energy storage
Electric vehicle lithium battery maintenance
- Categories:lithium ion battery News
- Author:
- Origin:
- Time of issue:2022-05-01 14:03
- Views:
(Summary description)In today's increasingly common lithium batteries for electric vehicles, the daily maintenance of lithium batteries for electric vehicles also affects the hearts of countless consumers.
Electric vehicle lithium battery maintenance
(Summary description)In today's increasingly common lithium batteries for electric vehicles, the daily maintenance of lithium batteries for electric vehicles also affects the hearts of countless consumers.
- Categories:lithium ion battery News
- Author:
- Origin:
- Time of issue:2022-05-01 14:03
- Views:
In today's increasingly common lithium batteries for electric vehicles, the daily maintenance of lithium batteries for electric vehicles also affects the hearts of countless consumers. So what should be paid attention to in the maintenance of electric vehicle lithium batteries?
1. When using the lithium-ion bicycle for the first time, the battery must be deeply charged. After the charger shows the green light, the charging can be stopped. The time is generally controlled within (8-10) hours;
2. Recharge after each ride until the battery pack can not discharge power, but avoid deep discharge (more than 90% of the capacity) before recharging, which will damage the lithium battery;
3. When the undervoltage indicator lights on the lithium battery bicycle in a stationary state, it should be charged in time;
4. When starting, climbing or driving against the wind, pedals should be used to assist;
5. Due to the characteristic of no memory of lithium battery, the battery pack should be charged regularly every time or every day after riding;
6. If the lithium-ion bicycle is placed for more than two months, the battery pack needs to be fully charged; if it is placed for more than 5 months, a charge-discharge cycle is required;
7. Master the correct charging method. Connect the charger and battery pack first, and then connect the power plug of the charger to the 220V AC power supply. This connection sequence can avoid sparks when plugging and unplugging. When the power is turned on, the charger will display a red indicator light;
8. Use a dedicated lithium battery charger (do not use lead-acid battery chargers directly), which must be completely matched with the lithium battery model. Excessive charger current will break down the lithium battery protection system and cause a short circuit, thereby causing a safety accident of the lithium battery. The charger voltage is too low, which makes the charging efficiency low and takes too much time;
9. When the lithium-ion bicycle is not in use, the power should be turned off in time, or the battery pack should be pulled out from the battery holder and placed in another place. Because the motor and controller will still consume power under no-load state;
Scan the QR code to read on your phone
Relevant Information
- Related Products
- PRODUCT
CONTACT US
Copyright © 2021 Suzhou Surge Power Technology Co., Ltd. All Rights Reserved 苏ICP备2020068098号-1 Privacy Policy
Powered by:www.300.cn IPv6 is supported